Ashu Enterprises

Product Details :

SikaTop® Seal-109 hiLiquid applied crack bridging, 2 Pack acrylic cementitious waterproofing coating system
SikaTop® Seal-109 hi is a liquid applied, crack bridging 2 pack acrylic polymer modified cementitious waterproofing coating system with moderate to high degree of elasticity depending on system buildup.

Crack-bridging & Elastic,

Good Impermeability against water ingress,

Highly water resistant, arrest salt petre and prevent carbonation.

Usage:

Used as a seamless, impervious coating on flat roof for both exposed and concealed waterproof coating system

Basements, water retaining structures, underground concrete structures, pits, basins, sumps etc.

Used as waterproofing coating on concrete, screed, mortar, brick tiles, cement tiles, plaster or porous stone substrates.

Advantages:

Crack-bridging & Elastic,

Good Impermeability against water ingress

Highly water resistant, arrest salt petre and prevent carbonation

Extremely good bonding with high abrasion resistance,

Simple application and fast curing,

It has excellent adhesion to concrete, brickwork and corrugated asbestos cement sheets.

SikaLatex® Power is a synthetic rubber emulsion which when added to cement slurry/ cement mortar/concrete/grout provides good adhesion and water resistance. It comes in the form of a milky liquid. It is fully soluble in water and is to be added directly to the gauging water of mortar/concrete/ cementitious grout.

• Improves elasticity, flexibility, tensile strength of cement and reduces cracking
• Makes the mortar waterproof and reduces susceptibility to acids and gases, salt petre action etc.
• Mortar with Sika® Latex Power shows extremely good bonding to bases like concrete, stone, brick etc.

• For waterproofing of roof slabs, sunken slabs, basements, water tanks, sunshades etc. in combination with cement
• As a bonding agent for uses in repair and plastering
• For making polymer mortar for repairs mortars etc.
• Treatment for leaching and saltpetre action
• Multipurpose mortar admixture for injection grouts.

• Improves elasticity, flexibility, tensile strength of cement and reduces cracking
• Makes the mortar waterproof and reduces susceptibility to acids and gases, salt petre action etc.
• Mortar with Sika® Latex Power shows extremely good bonding to bases like concrete, stone, brick etc.
• Reduces viscosity of cement injection grout and improves bond of cured injected materials with substrates
• Sika® Latex Power can be diluted with water (1 : 4 - 6) depending on the type of application
• Screed required with Sikacim®/ Sika® Plastocrete Super to protect waterproofing layer
• Standard coating system can be further reinforced by placing Sika®Fab1 fabric layer in between 1st and the 2nd coat.

Sika® RainTite I is a multifunctional polymer emulsion for enhancing the properties of mortar/concrete/grout/cement slurry. It provides a good adhesion, water resistance and improvement of several other properties.

• Improved impermeability against water ingress   
• Extremely good bonding to moist substrates, extremely improved mechanical, flexural strength and abrasion resistance properties
• UV resistant & suitable for external coating.

• Waterproofing of roof slab, sunken slabs, basements, water tanks, sunshades etc.
• As a bonding agent for uses in repair and plastering
• For making polymer mortar for repairs mortars etc.
• For treatment for leaching and salt petre action
• As a multipurpose mortar admixture for injection grouts
• Additives to cement based paints for waterproofing.

• Improved impermeability against water ingress   
• Extremely good bonding to moist substrates, extremely improved mechanical, flexural strength and abrasion resistance properties
• UV resistant & suitable for external coating
• When used as an additive to cement based paint improves impermeability, water repellence and anti fungal property of the painted surface (site trials are always advised before application for shade variations, if any)
• Sika® RainTite I can be diluted with water (1 : Nil to 1 : 4) depending on the type of application
• Screed required with Sikacim®/ Sika® Plastocrete Super to protect waterproofing

Epoxy based, two component structural bonding agent. Sika® 32LP compiles with ASTM 881 – 87 Type II Grade 2 Class B and C.

• Long pot life and open time allows sufficient time for placement of new concrete
• Can be applied on moist surface also
• Once the two components of the material is mixed the material must be used within approx 4 hours.

• Long pot life and open time allows sufficient time for placement of new concrete
• Can be applied on moist surface also
• Once the two components of the material is mixed the material must be used within approx 4 hours